The GATOR EDGE X4 is made with 100% Polypropylene, which gives it great strength and flexibility. The GATOR EDGE X4 could be used for all linear applications and curved applications when removing the bridge support. It is perfect for walkways, paths, entrances, etc. GATOR EDGE X4 can be locked together with the “SNAP & LOCK” system.

Ideal for:

Helps define walkways, paths, patios etc.
Thin pavers, slabs, wet cast and natural stone (1 1/2″-2″ thickness (38-50 mm))
Creating straight line edging, interior or exterior curves

Features:

4 feet long
1 5/8″ height
2 3/4″ depth
“Snap & Lock” System
Xtra Lateral support
Xtra Light
Xtra Strong
Easy to carry
Easy storage
Less waste 4′ vs 8′
12 packs x 2 edges = 24 units = 96 linear ft = 1 bundle
UV resistant
Use with Gator Nails
Use Gator Base Screws in Gator Base application

Coverage & Packaging:

Product	Unit Size Length	Skid
GATOR EDGE X4	4 feet long	Full skid: pack of 2 units of 4 feet = 8 li. ft. bundle has 12 packs = 96 li. ft. 1 pallet = 32 bundles = 3072 li. ft.

Product

Unit Size Length

Skid

GATOR EDGE X4

4 feet long

Full skid:

pack of 2 units of 4 feet = 8 li. ft.
bundle has 12 packs = 96 li. ft.
1 pallet = 32 bundles = 3072 li. ft.

Installation Instructions:

STEP 1

It can be installed either before or after the paver, wet cast slab or natural stone installation.

STEP 2

Use one 10″ nail every second hole and at every “SNAP & LOCK” junction to ensure continuous lateral support. Ensure the GATOR EDGE X4 are installed firmly against the pavers on a minimal compacted structural aggregate base of 6″ (15 cm) deeper and wider on all sides than the paved area.

STEP 3

When using Gator Base panels use Gator Base Screws at every second hole and every “SNAP & LOCK” junction to ensure continuous lateral support. Ensure the GATOR EDGE X4 are installed firmly against the pavers. The Gator Base panels must be 6″ (15 cm) wider on all sides than the paved area.

Deal of the day